You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
(516)778-8888
  • Your shopping cart is empty!

iPhone Blank or Black Screen

 

The problem of Black or Blank Screen is easy to fix if you follow these steps carefully. First step involves troubleshooting the iPhone by plugging it to a USB port on your computer. The low battery is often the reason for black screen. If you leave the phone on charging for 5 minutes the problem will be solved.

If the iPhone is still not back to its original state then make sure the computer is recognizing the phone. Now you have to go to hard reset mode after backing up information on the computer. To go into hard rest mode, press and hold power button and home button at the same time. You will hear a beep and see the apple logo appearing. This means that the DFU (Device Firmware Update) mode worked. Now you have to install all the apps and data.

You will do the next step, if any of the previous steps did not work. The reason for the failure of DFU (Device Firmware Update) mode could be that your computer is not recognizing the phone. Check if the power cable is intact. Use a different cable and check if the problem is fixed. You can borrow one from your friend or relative to do this.

If none of the above steps worked, it could be the damaged screen making it black out. To replace the screen you need to buy a new iPhone replacement screen. You can get a new screen from online websites like uwlcd.com The cost of the screen depends on the wholesale provider. So ensure that you search for the best provider who can give you a screen of high quality and also it is affordable to buy. Next you have to find a repair shop that can perfectly fix the screen at a reasonable cost. You can either go to Apple care or any independent repair shop.

 

iPhone screen blinking

 

The iPhone screen blinking or flickering issue is experienced from users who upgraded their devices. There are other issues as well that come because of the software upgrade such as Wi-Fi not working, device heat out and battery drain.

Below are 5 ways to fix the iPhone

Restart the phone. This might solve the problem of flickering

Disable the auto brightness function. Launch Settings app->Display & Brightness->Auto-Brightness->Turn Off

Disable Zoom. To do this, go to Settings->General->Accessibility->Zoom off

Reduce Motion. Settings->General->Accessibility->Reduce Motion->On

Reset all the settings->Settings->General->Reset-> Rest all Settings.

Any of the five above solutions will help you to solve the iPhone screen flickering problem. If it doesn't get solved, then possibility you have to get a iPhone screen replacement.

 

iPhone screen green problem

 

iPhone screen green problem

 

It is annoying to see an iPhone plagued with green screen or discoloration. Sometimes this problem is also associated with frozen, unresponsive screen. Below are some of the ways to fix the green screen problem

First solution is the simplest of all, Restart your device. This involves press and hold of sleep/wake button on the phone. After you do this, wait for a minute and do the same to turn On the phone. If there was graphic buffer memory problem then it will be fixed.

Second solution involves connecting your phone to the computer. No need to restore the software or anything. Just plug the device to your computer and wait for 5 minutes.

Third solution requires you to plug the device to wall power source using the adapter. Leaving the phone for charging for several minutes

If that doesn't work then remove the battery, and put it back ON the device

Last and final option try to fix the iPhone green screen problem by switching ON the device in DFU (Device Firmware Update) mode. You might have to do this many times to fix the problem

  1. Connect the iPhone to your computer and turn on iTunes
  2. Turn off the phone
  3. Press and hold the power button along with holding the home button for several seconds
  4. Stop holding the power button, but still hold the home button
  5. iTunes sends you message that the phone is detected.

Green screen could be gone at first try. If not, try it again.

 

iPhone screen horizontal lines

 

iPhone screen horizontal lines

 

To fix this you need to buy a LCD iPhone replacement.

 

iPhone white screen

 

iPhone screen white screen

 

The white screen iPhone problem happens when the battery is below 25%. The home screen becomes frozen and the phone becomes completely unusable. To fix this issue you can follow the below steps

First, press two or more buttons at the same time. Hold sleep/power, Volume Up, Home, Number key all together at once. The white screen will disappear after a few seconds. Now release the buttons and wait for the Apple Logo to appear after reboot.

Second method requires you to remove the battery. Clip it back and restart the phone.

To follow the third method, Connect your iPhone to the computer and open iTunes. Now press and hold Sleep/Wake and Home button at the same time. Release the buttons after a few seconds to see the iTunes message. This will restore the phone and put it into DFU (Device Firmware Update) mode.

Next method is called the finger tap. When you see the white screen tap on it with your three fingers.

Sometimes the auto brightness option of the light sensor causes white screen problem. Turn it Off in the iPhone settings to solve iPhone white screen problem.

 

iPhone touch screen problem

 

The first thing you have to do is restart the phone. If this doesn't work, go to Settings-> General->Reset-> Reset all settings. After you do this you will have to re-enter password, wallpaper, set date and time, and set up touch ID.

If the above two methods doesn't work then perform the factory reset. This will erase all the date in the phone.

 

iPhone screen jumpy

 

iPhone screen jump problem mostly comes after one replaces the old screen. Other reason for this could be using an Non-Apple charger that is not compatible with the phone. To fix this issue, charge the phone using a genuine charger and check if it is fixed.

The jailbreak phones also get this problem. You need to restore the phone.